WARNING :
Install the lubricator away from a dangerous location, or when the temperature is over 50 deg.C, and pipe it to the bearing. 

A remote installation is also recommended when there is excessive vibration at the bearing. Where the temperature is over 50oC, please use copper piping, otherwise the use of Polyurethane Tubing will be sufficient.

¡@

Remote Installation
Step 16
Tighten the sealing tape on the outlet thread of the grease cup and adapter separately. First mount the fixer, then mount the adapter onto the grease nipple hole. Afterwards, connect the piping or tubing to the fixer's adapter and to the bearing's adapter.
Connect a grease nipple ( PT 1/2" ) onto the fixer's adapter; then inject new grease through the piping or tubing until the whole piping system is full.
Finally, please take out the grease nipple, then tighten the lubricator by hand onto the fixer.
Polyurethane Tube Connection Fixer P-405F
 ¡@ P - 406F Copper Piping Connection Fixer
Tubing Connector 1/4" (M) P-502U
 ¡@ P - 603H Copper Piping Connector 3/8" (M)
Tubing Connector 1/8" (M) P-501U
 ¡@ P - 602H Copper Piping Connector 1/4" (M)
Tubing Connector 1/16" (M) P-500U
 ¡@ P - 601H Copper Piping Connector 1/8" (M)
90o Tubing Connector 1/4" (M) P-502U
 ¡@ P - 693H 90o Copper Piping Connector 3/8" (M)
90o Tubing Connector 1/8" (M) P-501U
 ¡@ P - 692H 90o Copper Piping Connector 1/4" (M)
90o Tubing Connector 1/16" (M) P-500U
 ¡@ P - 691H 90o Copper Piping Connector 1/8" (M)
Polyurethane Tube 5 x 8 mm x 100 M/per roll P-508U
 ¡@ ¡@

/ Back /
/ Home /

/ How it works /

¡@